MOD INSTALL : INSTALLATION OF SPARKY POSTER MOD FOR CREATURE FROM THE BLACK LAGOON
I recently installed the Sparky Poster Mod for my CFTBL pinball machine. The install took about 30 minutes and was very easy. The mod has two connectors on the cable and the screen needs to be mounted to the back right hand side of the pinball machine. The one connector goes to J117 on the driver board in the back box to give the mod power. The other 5 pin connector connects to the back of the screen. The connector connects to the the top set of pins with the red cable facing the gold ribbon cable on the back of the screen.
The screen mounts to the nut closest to the top shooter lane gate.
Purchase Here :
Click Below to View the Installation Video :