December 22

Mod Install : Walking Dead Fish Tank Topper Install and Shooter Lane Tweak

In this post I am going to show how to install the Fish Tank topper and how to tweak the shooter lane area so the ball will get to the skill shot.


• Insert the connectors from the kit through the hole located on the right side on top of the back box

• Install resistor board (included with the kit) to existing PEM studs located on back box and secure with 4 nuts provided

• Install BLUE Z header to BLUE connector and RED Z header to RED connector

• Unplug connector J6 from the I/O board and plug it to the BLUE connector from the kit

• Unplug connector J7 from the I/O board and plug it to the RED connector from the kit

• Plug the BLACK connector from the kit to J7 of the I/O board

• Plug the WHITE connector from the kit to J6 of the I/O board

• Plug the 7 pin connector from the kit to the resistor board

• Clean up wiring


 

DSC01134

VIDEO:
Click Here to View Video :
https://www.youtube.com/watch?v=JwuyR2FkoqA&feature=youtu.be


Click Here to View Website :
http://www.pinballsupernova.com/walking%20dead%20topper%20install.htmlwalking dead fish tank topper install


 

Advertisements